OPC_UA_Driver Connection from Kepwarr

[Helman112]

Hello
Guys

I am working on a test application with Machine Simulator.

I have Machine Simulator installed in my PC and Kepware installed in a Virtual machine.
I have kepware configure to expose tags over OPC UA, and I configure Kepware OPC UA to Trust the EasyPLC OPCUA Driver, also I disable the security policies and leave it as None.

On the machine Simulator PC, I opened a project and edit the Driver OPC_UA_Driver, I entered the PC UA server (opc.tcp://192.168.100.35:49320), I am able to see the objects and assign the tags to the PLC Outs and Inps.
Also at the NodeId I can see the tags changing values

However, after assigning the IOs I save and exit and Start the driver and exit. the Simulator never start.
Even though the Driver status says Driver Connected, the simulator environment does not respond to the PLC tag changes


Is the anything I am missing. I will really appreciate your help

Thanks
Helman