codesys

[baciocco]

it is possible to communicate with the codesys program
someone has an example
thank you

[EasyPLC_Master]

Yes, you can use the following procedure:

https://store.codesys.com/shared-memory-communication.html?___store=en&___from_store=default#Product%20Description

Data can be exchanged between a CODESYS controller and EasyPLC by means of shared memory. EasyPLC have a generic Shared Memory driver or you can use the EasyPLC S.D.K to create you our Shared Memory driver according CODESYS rules.

http://www.nirtec.com/index.php/easyplc-sofware-development-kit/

[baciocco]

Thanks for your help
but I can not find examples how to use shared memory

[baciocco]

you can not use the OPC driver

[baciocco]

You can use codesys with opc drive if you can have some examples
thank you

[EasyPLC_Master]

As I wrote in the previous message, with the information available in this site:

https://store.codesys.com/shared-memory-communication.html?___store=en&___from_store=default#Product%20Description

And the available documentation for the EasyPLC SDK:

http://www.nirtec.com/index.php/easyplc-sofware-development-kit/

You should be able to develop the communication requested.