Tutorial package

[Jaime Fonseca]

In the tutorial when you use the option "create EasyPlc Program" and following the steps in the help (manual) the virtual PLC execute but not show the inputs and outputs for the simulation. But if you write the same code using the option "EasyPLC Logic Program" all work well.

But in this package I have another problem with the option "Launch MS3 Simulation". This option not work. I have the version 4 of MS and the option is the 3. The problem is the version? How I can solve this problem?

I have a USB licences

Thanks for your attention

[EasyPLC_Master]

For first issue, remember to add the proper driver in order to communicate with Machines Simulator.

For second, you must to configure the Machines Simulator v.4 installation path in order thr tutorial can launch the correct program. In Menu -> Configure.

Regards.

[Jaime Fonseca]

I not understand your answer. I'll try to explain my problem better.
I following all the steps presented in the video https://www.nirtec.com/using-easyplc-tutorial-package/. The only difference is that I used the option "See the solution". In the EasyPLC everything is the same as in the video. When I try the option "Launch MS3 Simulation" nothing happens.
In your reply you tell me to go to menu->configure MS4. But in this menu I couldn't find anything to solve the problem. Could you be clearer about the option I should change?

[Jaime Fonseca]

The problem is solved when I changed the path in the configuration of the tutorial manager (page 26 in the tutorial manager help).

Thank you for your attention