Text only | Text with Images

Nirtec Studio Forum

General Category => Machines Simulator => Tutorials => Topic started by: Jaime Fonseca on October 31, 2024, 05:20:53 PM

Title: connection between OMRON plc NX102 9020 and machine simulator using OPC UA
Post by: Jaime Fonseca on October 31, 2024, 05:20:53 PM
Dear Sir,
I have the OMRON PLC NX102-9020 with OPC-UA and I tried to control the first example in the machine simulator. Everything seems fine but it doesn't work. I'll try to show you using images (see the four slides in attach).
slides.zip

If you have any videos or pdfs that can help, please send them to me.

Thanks
Best regards
Jaime Fonseca


 

Title: Re: connection between OMRON plc NX102 9020 and machine simulator using OPC UA
Post by: EasyPLC_Master on October 31, 2024, 06:14:42 PM
Here you have a YouTube video made by a teacher, where explains how to connect Machines Simulator with OMRON PLC using OPC UA:


Title: Re: connection between OMRON plc NX102 9020 and machine simulator using OPC UA
Post by: Jaime Fonseca on October 31, 2024, 10:39:50 PM
thank you very much for the video. I had already seen this video and it uses a shneider plc and not an omron one. It's different.
Text only | Text with Images