Text only | Text with Images

Nirtec Studio Forum

General Category => Machines Simulator => Topic started by: jredrejo on April 24, 2024, 12:15:08 PM

Title: Using with VR a machine created in 3.0
Post by: jredrejo on April 24, 2024, 12:15:08 PM
Hello,
I have created an UDC and a Machine using it with Machines Simulator 3.22.0 , It works there perfectly.
Then, I've moved both the Machine and the UDC files to the folders with the same names ('MyMachines' , 'UserDefinedComponents' & '\ms3vrbin_Data\StreamingAssets') in the Machines Simulator VR folder.

However, the machine does not appear in the VR (version 1.21.1) interface. I can navigate by any of the default machines , but I can't see or access to the machine I've created.

Is there any special setup in the machine or in its UDC when it's created for it to appear? Adding a png image is mandatory? I'd like to know if I'm missing something or it's just a bug.

Regards
José L.
Title: Re: Using with VR a machine created in 3.0
Post by: EasyPLC_Master on April 24, 2024, 07:08:37 PM
Hi José,

Once you create your machine with Machines Simulator v.3 editor, copy the .maq file from Machines Simulator MyMachines\ folder to Machines Simulator VR MyMachines\ folder.
The UDC files must to be copied in the C:\Nirtec\Machines Simulator VR\UserDefinedComponents\ folder, but all files in the same folder (\UserDefinedComponents\ ), without folder nesting, otherwise it won't work.
Title: Re: Using with VR a machine created in 3.0
Post by: jredrejo on May 02, 2024, 08:55:31 AM
Quote from: EasyPLC_Master on April 24, 2024, 07:08:37 PMHi José,

Once you create your machine with Machines Simulator v.3 editor, copy the .maq file from Machines Simulator MyMachines\ folder to Machines Simulator VR MyMachines\ folder.
The UDC files must to be copied in the C:\Nirtec\Machines Simulator VR\UserDefinedComponents\ folder, but all files in the same folder (\UserDefinedComponents\ ), without folder nesting, otherwise it won't work.


I've tried it and it does not work, I have not subfolders in the \UserDefinedComponents\ or the MyMachines\ folders in the Machines Simulator VR MyMachines\ folder.
Could it be a problem with the StreamingAssets folder? Is there any rules to place these files (I'm using obj 3d files in my machine)
Regards
Title: Re: Using with VR a machine created in 3.0
Post by: EasyPLC_Master on May 02, 2024, 10:16:39 AM
Can you send your .maq file to info@nirtec.com in order to analyze if there's any problem on it?
Title: Re: Using with VR a machine created in 3.0
Post by: jredrejo on May 02, 2024, 06:40:08 PM
Quote from: EasyPLC_Master on May 02, 2024, 10:16:39 AMCan you send your .maq file to info@nirtec.com in order to analyze if there's any problem on it?

Sent, thanks for the support!
Text only | Text with Images